Technology / Deployment & Commissioning
Deployment & Commissioning
TrackLab deployment is about more than installing hardware. The real goal is to move from physical installation into a site that can be monitored, supported, and operated with confidence.
This public guide explains the commissioning story at a safe technical level: what gets planned, what gets verified, and what operators and project teams should expect before a solar tracking site is considered ready.
Deployment Story
Site Preparation
Deployment starts with a practical review of site layout, controller locations, power availability, weather inputs, and the communication pattern best suited to the farm.
Field Bring-Online
TCUs and NCUs are installed, linked into the chosen field network, and checked for expected device discovery, telemetry flow, and command paths.
Configuration and Validation
Tracking parameters, control thresholds, and monitoring workflows are confirmed in sequence so operators can validate row behaviour before handover.
Operational Readiness
The final commissioning goal is not just “powered on” hardware. It is a site that can be monitored, supported, and operated with clear escalation and visibility paths.
Commissioning Flow
The safest public way to describe commissioning is as a controlled sequence: plan first, verify field connectivity, validate system behaviour, then hand the site over with a clear operating model.
Plan
Align layout, communications, and operational scope before field rollout.
Install
Bring hardware online and verify field connectivity section by section.
Validate
Confirm control logic, telemetry flow, and safety behaviour.
Handover
Move to monitored, supportable day-to-day operation.
What Project Teams Check
Before installation
- Confirm site layout, controller counts, and section boundaries
- Confirm power model and enclosure placement
- Choose the public-safe communication and uplink narrative for the project
During bring-online
- Verify TCU discovery and NCU coordination
- Verify telemetry flow into monitoring workflows
- Check weather integration, safety thresholds, and alert paths
Before handover
- Validate remote visibility and user access
- Confirm reporting, alerts, and support contacts
- Document the agreed operating model for the project team
Signals of a Good Handover
Related Documentation
Share this resource
Cite this page
TrackLab Solar. (2026). Deployment & Commissioning. Retrieved from https://tracklabsolar.com/technology/deployment-and-commissioning
Planning a TrackLab rollout?
The TrackLab team can walk through deployment assumptions, commissioning expectations, and the technical review path for your project.